New ! SP7731CEB_T13_X164_HOTWAV_64_4_scx20_sp7731ceb_t13_x164_1_hotwav_64_4_5.1_20161229_Venus_X12.pac

Md Firoz Ahmed™

Md Firoz Ahmed™

Super VIP Member
Joined
Dec 13, 2016
Messages
2,780
Likes
1,334
Points
114
Age
31
#1
Hotwav Venus X12 Firmware 100% Tested Flash File Read In CM2

hotwav20170128_2701_mh1485700859172.jpg


Hotwav X12 Firmware 100% Tested Flash File Read In CM2

Read File Info:
Code:
- > Wait phone connected ...

Phone found! [ 8 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731ceb_t13_x164_1_hotwav_64_4_dt
Model Brand : HOTWAV
Model Device: scx20_sp7731ceb_t13_x164_1_hotwav_64_4
AndrVersion : 5.1
BaseBand CPU: SP7731CEB_T13_X164_HOTWAV_64_4
Project Ver : 20161229
Model Ext   : Venus X12

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2178 MiB
Saved to : C:\Users\Tech GSM\Desktop\hotwav v12\SP7731CEB_T13_X164_HOTWAV_64_4_scx20_sp7731ceb_t13_x164_1_hotwav_64_4_5.1_20161229_Venus_X12\
Done!

Elapsed: 00:30:45

Reconnect Power/Cable!


Operation : Convert InfinitySC to SPRD PAC [ v1.24 ]

Target : SP7731CEB_T13_X164_HOTWAV_64_4_scx20_sp7731ceb_t13_x164_1_hotwav_64_4_5.1_20161229_Venus_X12
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731C_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[ADD FILE] : logo_480x854.bin
[ADD FILE] : fblogo_480x854.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : oem.img
[ADD FILE] : sysinfo.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0019
Sign PAC ...
Sign Ok! FW compiled!
Elapsed: 00:01:20

Saved to : SP7731CEB_T13_X164_HOTWAV_64_4_scx20_sp7731ceb_t13_x164_1_hotwav_64_4_5.1_20161229_Venus_X12.pac
Done!
You do not have permission to view link Log in or register now.
 
U

umarameen

New Member
Joined
May 20, 2017
Messages
1
Likes
0
Points
2
Age
35
#2
no display after flashing this firmware
 
Top